DOWNLOADS QUICK MENU:

Service Packs  |  TermMon Active X Control  |  WinTMC Client  |  TermcapFirmware  |  Modules



THINMANAGER 4

ThinManager 4.1

Version: 4.1

Note: You must have Comp Support or have purchased license upgrades to use this version to upgrade an existing installation.

Download ThinManager41Install.exe

(4/15/2011)

SERVICE PACKS

TM 4.0 Service Pack 3

Download ThinManager_40_SP3_Install.exe

(7/23/2010)

TM 3.3 Service Pack 2

Download ThinManager_33_SP2_Install.exe

(1/13/2010)

TM 3.2 Service Pack 1

Download ThinManager_32_SP1_Install.exe

(10/16/2008)

TM 3.1 Service Pack 2

Download ThinManager_31SP2_Install.exe

(7/28/2008)

TM 3.0 Service Pack 6

Download ThinManager_30SP6_Install.exe

(3/7/2007)

TM 2.6 Service Pack 2

Download
ThinManager 26SP2.exe

(8/17/2006)

TERMMON ACTIVE X CONTROL [Back To Top]

TermMon Active X Control Description: TermMon ActiveX Control (TermMon.ocx)
Version: 3.0.0

Download TermMon.ocx

Download TermMonActiveXrev2.pdf

(4/15/2011)

WINTMC CLIENT [Back To Top]

WinTMC Client Application Description: WinTMC client for PCs
WinTMC Version: 2.1.0.5

Download
WinTMCInstall.exe

Download Compressed WinTMCInstall.zip

(4/15/2011)

TERMCAP [Back To Top]

TermCap v4.1.2 Description: For user with all versions of ThinManager. The TermCap database contains hardware information specific to all ThinManager Ready Thin Clients.
Version: 4.1.2

Download
termcap.db.4.1.2

(5/17/2011)

FIRMWARE [Back To Top]

Firmware 3.2 Description: For use with ThinManager 3.0 and later. If you are using ThinManager 2.X please see your distributor about upgrading to a supported version.
Version: 03.02.6

Download
firmware.acp.v03.02.6

(8/22/2006)

Firmware 3.3 Description: For use with ThinManager 3.x and later. If you are using ThinManager 2.X please see your distributor about upgrading to a supported version.
It is recommended that you download and install all Video2 modules if you are upgrading from v3.2 or older firmware. See VideoModules.pdf for details.
It is recommended that you download and install any touch screen modules used if you are upgrading from v3.2 or older firmware.
Version: 03.03.1

Download
firmware.acp.v03.03.1

(7/2/2009)

Firmware 4.x Description: For use with ThinManager 4.0 and later. If you are using ThinManager 2.X or 3.X please see your distributor about upgrading to a supported version.
It is recommended that you download and install all Video2 modules if you are upgrading from v3.2 or older firmware. See VideoModules.pdf for details.
It is recommended that you download and install any touch screen modules used if you are upgrading from v3.2 or older firmware.
Version: 04.01.1

Download
firmware.acp.v04.01.1

(5/17/2011)

TOUCH SCREEN CALIBRATION [Back To Top]

Touch Screen Calibration Program
Description: This program is included in the ThinManager installation as ThinManager Utilities. It needs to be install on each terminal server if you want to launch the calibration program from the Start menu in the session instead of starting the calibration from Tools> Calibrate Touch screen in ThinManager.
It is provide here for customers who are using firmware v3.0.201 or newer.

Download
CalTouchScreen.exe

(4/5/2007)


MODULES QUICK MENU:

ICA  |  Local Storage  |  Mouse  |  RDP  |  ScreenSaver  |  Sound  |  Mouse  |  TermSecure

Touchscreen  |  Video |  Other Modules

 

ICA Modules [Back To Top]  |  [Back To Modules Top]

ICA Client 8 Description: ICA Client Module version 8. Do not add this module to your terminal configuration. The terminal will automatically determine if this
module is required. For use with firmware v3.0.0 or newer.
Version: 4.1.2

Download icaclient8.mod

(4/15/2011)

ICA Client Description: ICA Client Module. Do not add this module to your terminal
configuration. The terminal will automatically determine if this
module is required. For use with firmware v3.0.0 or newer.
Version: 4.1.0

Download icaclient.mod

(4/15/2011)

ICA Use Alternative Address Module Description: ICA use alternate address module
Version: 4.1.0

Download usealtadr.mod

(4/15/2011)

wfclient.ini Extension Module Description: wfclient.ini extension module. Use this module to add entries in your wfclient.ini file.
Version: 4.1.0

Download wfclientext.mod

(4/15/2011)

Local Storage Modules [Back To Top]  |  [Back To Modules Top]

USB Flash Drive Module

Download usb_flash_drive.mod

(4/15/2011)

USB Memory Card Reader Module

Download usb_card_reader.mod

(4/15/2011)

Mouse Modules [Back To Top]  |  [Back To Modules Top]

Mouse Configuration Module Description: Use this module to configure your USB or PS/2 mouse.

This module REQUIRES firmware v2.05.110 or newer.
Version: 4.1.1

Download mouse.mod

(4/15/2011)

PS/2 Mouse Module Description: The PS/2 Mouse Module allows the user to use a scroll mouse and change settings such as mouse acceleration. This module has been replaced by the Mouse module.
Version: 4.1.0

Download ps2_mouse.mod

(4/15/2011)

Serial Mouse Module Description: Add this module to your Terminal Configuration if you wish to use a Serial Mouse.
Version: 4.1.1

Download serial_mouse.mod

(4/15/2011)

Share Keyboard and Mouse Master Module

Download share_km_master.mod

(4/15/2011)

Share Keyboard and Mouse Slave Module

Download share_km_slave.mod

(4/15/2011)

RDP Modules [Back To Top]  |  [Back To Modules Top]

RDP Experience Module Description: Module to configure RDP Experience settings.
Version: 4.1.0

Download rdp_exp.mod

(4/15/2011)

RDP Module Description: This Module is for users of ThinManager Version 2.3.X and 2.4 who wish to use RDP. This module requires firmware Version 02.05.100 or newer. ThinManager Version 2.4.1 and newer support RDP without the need for this module.
Version: 4.1.0

Download rdp.mod

(4/15/2011)

RDP Port Module Description: This module allows you to change the RDP port number. Requires firmware version 3.0.0 or newer.
Version: 4.1.0

Download rdp_port.mod

(4/15/2011)

RDP Serial Redirection Module

Download rdp_serial.mod

(4/15/2011)

Screen Saver Modules [Back To Top]  |  [Back To Modules Top]

MultiSession Screen Saver Module Description: Screen saver module for use with MultiSession.
Version: 4.1.0

Download ms_screensaver.mod

(4/15/2011)

Screen Saver Module Description: Allows a local screen saver to run on the terminal. Requires firmware version 02.05.124 or later.
Version: 4.1.0

Download screensaver.mod

(4/15/2011)

Sound Modules [Back To Top]  |  [Back To Modules Top]

Universal Sound Module Description: Sound Module for all ThinManager Ready Hardware
Version: 4.1.0

sound.mod

(4/15/2011)

VIA 82xx Sound Module Description: Sound Module for VIA 82xx
Version: 4.1.0

via82xx_sound.mod

(4/15/2011)

Intel8x0 Sound Module Description: Sound Module for Intel8x0
Version: 4.1.0

intel8x0_sound.mod

(4/15/2011)

HDA Sound Module Description: Sound Module for HDA
Version: 4.1.0

hda_sound.mod

(4/15/2011)

cs553x Sound Module Version: 4.1.0

cs553x_sound.mod

(4/15/2011)

TermSecure Modules [Back To Top]  |  [Back To Modules Top]

RFIdeas pcProx Module Description: RFIdeas pcProx card reader module for HID compatible access cards.
Version: 4.1.1

Download pcProx.mod

(4/15/2011)

RFIdeas pcProx USB Module Description: USB version of the RFIdeas pcProx card reader module for HID compatible access cards.
Version: 4.1.1

Download pcProxUSB.mod

(4/15/2011)

WaveTrend RFID Module Description: Module for WaveTrend RFID Card Reader.
Version: 4.1.0

Download wavetrend.mod

(4/15/2011)

Touchscreen Modules [Back To Top]  |  [Back To Modules Top]

Arista ARP-16XXAP-ACP Touch Screen Module Description: Touch Screen Module for Arista ARP-1606AP-ACP, ARP-1608AP-ACP, ARP-1610AP-ACP, ARP-1612AP-ACP and ARP-1615AP-ACP models.
Version: 4.1.5

Download arista_touch.mod

(4/15/2011)

CarrollTouch Touch Screen Module Description: Touch Screen module for CarrollTouch touch screen controllers.
Version: 4.1.5

Download carrolltouch.mod

(4/15/2011)

Contec Touch Screen Module Description: Touch Screen module for Contec touch screen controllers.
Version: 4.1.2

Download contec.mod

(4/15/2011)

DMC Touch Screen Module Description: Touch Screen module for DMC Touch Screen Controllers.
Version: 4.1.2

Download DMCTouch.mod

(4/15/2011)

DMC TSC Series Touch Screen Module Description: Touch Screen module for DMC TSC Series Touch Screen Controllers.
Version: 4.1.2

Download dmc_tsc_touch.mod

(4/15/2011)

DynaPro Touch Screen Module Description: Touch Screen Module for DynaPro Touch Screen Controllers.
Version: 4.1.4

Download dynapro.mod

(4/15/2011)

Elographics Touch Screen Module Description: Touch Screen module for Elographics touch screen controllers.
Version: 4.1.5

Download elotouch.mod

(4/15/2011)

Gunze AHL Touch Screen Module Description: Touch Screen Module for Gunze Touch Screen Controllers.
Version: 4.1.5

Download gunze_touch.mod

(4/15/2011)

Hampshire TSHARC Touch Module Description: Touch Screen Module for Hampshire TSHARC Touch Screen Controllers.
Version: 4.1.4

Download tsharc.mod

(4/15/2011)

MicroTouch Touch Screen Module Description: Touch Screen Module for MicroTouch Touch Screen Controllers.
Version: 4.1.5

Download microtouch.mod

(4/15/2011)

PanJit TouchSet Touch Module

Description: Touch Screen Module for PanJit Touch Screen Controllers.
Version: 4.1.5

Download touchset.mod

(4/15/2011)

PenMount Touch Screen Module Description: Touch Screen Module for PenMount Touch Screen Controllers.
Version: 4.1.5

Download penmount.mod

(4/15/2011)

Ronics Touch Screen Module Description: Touch Screen Module for Ronics Touch Screen Controllers.
Version: 4.1.2

Download ronics.mod

(4/15/2011)

Touch Controls Touch Screen Module Description: Touch Screen Module for Touch Controls Touch Screen Controllers.
Version: 4.1.3

Download touchcontrol.mod

(4/15/2011)

Touch International IR Touch Screen Module Description: Touch Screen Module for Touch International Infared Touch Screen Controllers.
Version: 4.1.2

Download touch_int.mod

(4/15/2011)

USB Touch Screen Module Description: Touch Screen Module for most USB Touch Screen Controllers.
Version: 4.1.12

Download usbtouch.mod

(4/15/2011)

Xycom 33XX Touch Screen Module Description: Touch Screen Driver for Xycom 3308, 3310, and 3312. Requires firmware version 02.05.126 or later.
Version: 4.1.2

Download xycom_touch.mod

(4/15/2011)

Zytronic Touch Screen Module Description: Touch Screen module for Zytronic Touch Screen Controllers.
Version: 4.1.3

Download zytronic_touch.mod

(4/15/2011)

All Video Modules [Back To Top]  |  [Back To Modules Top]

All Video Modules Description: This zipped file contains all the Video Modules to allow a single download of the Video Modules.
Do not add these modules to your terminal configuration. The terminal will automatically determine which video module it requires.
See VideoModules.pdf for details.
Requires Firmware version 3.0.100 or newer.
Version:4.x (files zipped on (4/15/2011)

Download video_modules.zip

(4/15/2011)

Video Modules [Back To Top]  |  [Back To Modules Top]

These Video Modules are required for firmware v3.2 and earlier. See VideoModules.pdf for details.

AMD Geode Video Module Description: Video module for use with terminals using the AMD Geode video chipset such as the Advantech UNO-2053E.
Do not add this module to your terminal configuration in ThinManager v3.0. The terminal will automatically determine which video module it requires.
With ThinManager 2.6 or older, see the 3.x Firmware download instructions
Requires Firmware version 3.0.100 or newer.
Version: 4.1.0

Download video_amd.mod

(4/15/2011)

Intel i8XX Video Module Description: Video module for use with Intel Video Chipsets.
Do not add this module to your terminal configuration. The terminal
will automatically determine which video module it requires.
Requires Firmware version 3.0.100 or newer.
Version: 4.1.0

Download video_intel.mod

(4/15/2011)

Intel i8xx/i9xx Video Module Description: Video module for use with Intel Video Chipsets.
Do not add this module to your terminal configuration. The terminal
will automatically determine which  video module it requires.
Requires Firmware version 3.0.100 or newer.
Version: 4.1.0

Download video_intel2.mod

(4/15/2011)

MultiMonitor Module
(requires a license)

Description: This module adds MultiMonitor functionality to terminals with MultiMonitor capability when using ThinManager 3.0 or earlier.

Users of ThinManager 3.1 need the module installed in ThinManager but should not add it to individual thin clients as MultiMonitor configuration is integrated into ThinManager 3.1.

This module is included with ThinManager 3.0 SP6 and later, as are the required Firmware and TermCap. This download is only required for ThinManager v3.0 SP5 or older.
Requires Firmware version 3.0.109 or newer.
Requires TermCap v3.0.6 or newer.
Version: 4.1.0

Download multi_monitor.mod

(4/15/2011)

S3 Savage4 Video Module Description: Video module for use with S3 Savage4 Video Chipsets.
Do not add this module to your terminal configuration. The terminal
will automatically determine which video module it requires.
Requires Firmware version 3.0.100 or newer.
Version: 4.1.0

Download video_savage.mod

(4/15/2011)

VIA CLE266 Video Module Description: Video module for use with VIA CLE266 Video Chipsets.
Do not add this module to your terminal configuration. The terminal
will automatically determine which video module it requires.
Requires Firmware version 3.0.100 or newer.
Version: 4.1.0

Download video_cle266.mod

(4/15/2011)

VIA Unichrome Video Module Description: Video module for use with terminals using the VIA Unichrome video chipset
Version 4.1.1

Download video_unichrome.mod

(4/15/2011)

Video2 Modules [Back To Top]  |  [Back To Modules Top]

Video2 Modules are required for firmware v3.3 and later. See VideoModules.pdf for details.

AMD Geode Video2 Module Description: Video module for use with terminals using the AMD Geode video chipset such as the Advantech UNO-2053E.
Do not add this module to your terminal configuration in ThinManager v3.0. The terminal will automatically determine which video module it requires.
With ThinManager 2.6 or older, see the 3.x Firmware download instructions
Requires Firmware version 3.0.100 or newer.
Version: 4.1.0

Download video2_amd.mod

(4/15/2011)

Intel i8XX Video2 Module Description: Video module for use with Intel Video Chipsets.
Do not add this module to your terminal configuration. The terminal
will automatically determine which video module it requires.
Requires Firmware version 3.0.100 or newer.
Version: 4.1.0

Download video2_intel.mod

(4/15/2011)

Intel i8xx/i9xx Video2 Module Description: Video module for use with Intel Video Chipsets.
Do not add this module to your terminal configuration. The terminal
will automatically determine which  video module it requires.
Requires Firmware version 3.0.100 or newer.
Version: 4.1.0

Download video2_intel2.mod

(4/15/2011)

Intel i8xx/i9xx Video2 Module Description: Video module for use with Intel Video Chipsets.
Do not add this module to your terminal configuration. The terminal
will automatically determine which  video module it requires.
Requires Firmware version 3.0.100 or newer.
Version: 4.1.1

Download video2_intel3.mod

(4/15/2011)

Intel 4 Video2 Module

Description: Video module for use with Intel Video Chipsets.
Do not add this module to your terminal configuration. The terminal
will automatically determine which  video module it requires.
Requires Firmware version 3.0.100 or newer.
Version: 4.1.0

video2_intel4.mod

(4/15/2011)

MultiMonitor2 Module

Description: This module adds MultiMonitor functionality to terminals with MultiMonitor capability when using ThinManager 3.0 or earlier.

Users of ThinManager 3.1 need the module installed in ThinManager but should not add it to individual thin clients as MultiMonitor configuration is integrated into ThinManager 3.1.

This module is included with ThinManager 3.0 SP6 and later, as are the required Firmware and TermCap. This download is only required for ThinManager v3.0 SP5 or older.
Requires Firmware version 3.0.109 or newer.
Requires TermCap v3.0.6 or newer.
Version: 4.1.0

Download multi_monitor2.mod

(4/15/2011)

S3 Savage4 Video2 Module Description: Video module for use with S3 Savage4 Video Chipsets.
Do not add this module to your terminal configuration. The terminal
will automatically determine which video module it requires.
Requires Firmware version 3.0.100 or newer.
Version: 4.1.1

Download video2_savage.mod

(4/15/2011)

VIA CLE266 Video2 Module Description: Video module for use with VIA CLE266 Video Chipsets.
Do not add this module to your terminal configuration. The terminal
will automatically determine which video module it requires.
Requires Firmware version 3.0.100 or newer.
Version: 4.1.0

Download video2_cle266.mod

(4/15/2011)

VIA Unichrome Video2 Module Description: Video module for use with terminals using the VIA Unichrome video chipset
Version 4.1.0

Download video2_unichrome.mod

(4/15/2011)

VIA Unichrome2 Video2 Module Description: Video module for use with terminals using the VIA Unichrome video chipset
Version 4.1.1

Download video2_via.mod

(4/15/2011)

Other Modules [Back To Top]  |  [Back To Modules Top]

Add Serial Port Module Description: The Add Serial Port Module allows additional serial ports to be added to the Thin Client hardware. This Module allows for the setting of the IO Addresses and IRQs of the newly added serial port hardware.
Version: 4.1.0

Download addserialport

(4/15/2011)

Firmware Update Module Description: For terminals using Disk-On-Chip or Compact Flash storage devices instead of network booting, this module allows the storage device to be updated to the firmware version which is currently installed in ThinManager.
Version: 4.1.2

Download docupdate.mod

(4/15/2011)

Key Block Module Description: Key Block Module used to block keys at the terminal.
Version: 4.1.1

Download key_block.mod

(4/15/2011)

Key Block Single Block Module Description: Key Block Module to block individual keys.
Version: 4.1.0

Download key_block_ind.mod

(4/15/2011)

Local Printer Module Description: The Local Printer Module allows a printer to be directly attached to the terminal. Specify the printer driver name in this module configuration.
Version: 4.1.0

Download local_printer.mod

(4/15/2011)

Redundant Ethernet Module
Description: The Redundant Ethernet Module allows ThinManager Ready thin clients that have dual Ethernet ports and Bootloader 5.4 or later to use two network cables for network redundancy.
This module requires Firmware v3.01.0 or later.
Version: 4.1.1

Download redundant_ethernet.mod

(4/15/2011)

Serial2TCP Module
(requires a license)

Description: The Serial2TCP Module allows a serial device connected to a ThinManager Ready thin client to send raw unformatted data via TCP.
This module requires Firmware v3.02.0 or later.
Version: 4.1.0

Download serial2tcp.mod

(4/15/2011)

TermMon ActiveX Configuration Module Description: This Module allows custom configuration when using the TermMon ActiveX Control.
Version: 4.0.0

Download activex.mod

(4/15/2011)

Terminal Shadow Module
Description: The Terminal Shadow Module is required for Terminal-To-Terminal shadowing. Do not add this module to the terminal configuration..
This module requires Firmware v3.02.0 or later.
Version: 4.1.2

Download term_shadow.mod

(4/15/2011)

Time Zone Redirection Module Description: Time Zone Redirection Module for terminals in different time zones than the Terminal Server.
Version: 4.1.1

Download time_zone.mod

(4/15/2011)

[Back To Top]  |  [Back To Modules Top]